CONTAINMENT FABRICATOR with Security Clearance
Dutieso You will independently perform assignments utilizing knowledge of theories, principles, techniques, practices and drawings from both isometric and two-dimensional views.
o You will read, interpret and follow instructions, drawings, and blueprints.
o You will apply knowledge and skill in mathematical principles of arithmetic, algebra, and geometry.
o You will plan, organize coordinate and implement design, fabrication, inspection and installation requirements.
o You will provide direction, instruction, and guidance to lower-grade employees and apprenticesRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o This is a bargaining unit position.
o You will be required to successfully complete a pre-appointment physical examination.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
o This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sitesYou must be able to travel on military and commercial aircraft for extended periods of time.
o Work is performed in areas where potentially harmful physical and chemical agents are present (e.
gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programs.
o I am willing and able to lift and/or carry loads/items up to 45 pounds in weight.
o This position requires that the selectee be willing and able to climb ladders and scaffoldingQualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on quality of experience, not necessarily the length of timeYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed belowThis job has a screen-out element which will be used to determine minimum eligibility for this jobApplicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligibleThe Screen-out Element for this position is:
ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION such as:
Experience reading, interpreting, and following complex written instructions, drawings, blueprints, specifications, radiological engineering standard, proper ventilation requirements for each situation and process instructions, corporate standards, and shop practicesExperience planning, organizing, coordinating, and implementing numerous quality-related requirements as they relate to design, fabrication, inspection, installation, and removal for both off-hull and in-hull enclosuresExperience using a variety of sensitive, calibrated, and precision trade specific instruments and equipment such as:
laser no-touch thermometers, digital laser levels, digital angle locaters, micrometers, automatic wedge, welding sealers, ultrasonic sealers, radio frequency heat sealers, CNC machines, air driven grommet, presses, computerized light weight, medium weight, and heavy weight sewing machines, programmable, embroidery machines, and programmable box stitch machinesExperience using mathematical principles of arithmetic, algebra, and geometry to figure out irregular curves, angles, planes, pitches, cylindrical, tapered, truncated cones and frustums for containment lay outApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor OccupationsAdditional qualification information can be found at:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separationTo be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offeredHow You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications aboveIn order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being consideredYour resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this positionTherefore, we encourage you to be clear and specific when describing your experienceWhen the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcementYou will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following job elements:
o ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION ABILITY TO FOLLOW DIRECTIONS IN A SHOP ABILITY TO INTERPRET INSTRUCTIONS AND SPECIFICATIONS, INCLUDING BLUEPRINT READING KNOWLEDGE OF MATERIALS You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection processIf selected, you may be required to provide supporting documentationIf after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualifiedPlease follow all instructions carefullyErrors or omissions may affect your rating or consideration for employmentAll eligibility and qualification requirements must be met by the closing date of this announcement.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefit Recommended Skills Algebra Blueprinting Coordinating Geometry Human Resources Industrial Laser Tasking Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
o You will read, interpret and follow instructions, drawings, and blueprints.
o You will apply knowledge and skill in mathematical principles of arithmetic, algebra, and geometry.
o You will plan, organize coordinate and implement design, fabrication, inspection and installation requirements.
o You will provide direction, instruction, and guidance to lower-grade employees and apprenticesRequirements Conditions of Employmento Must be a US Citizen.
o Must be determined suitable for federal employment.
o Must participate in the direct deposit pay program.
o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.
govo Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
o Males born after 12-31-59 must be registered for Selective Service.
o This is a bargaining unit position.
o You will be required to successfully complete a pre-appointment physical examination.
o You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
o You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
o This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sitesYou must be able to travel on military and commercial aircraft for extended periods of time.
o Work is performed in areas where potentially harmful physical and chemical agents are present (e.
gfumes, dust, heat, ionizing and non-ionizing radiation and chemicals)You will be required to participate in medical surveillance programs.
o I am willing and able to lift and/or carry loads/items up to 45 pounds in weight.
o This position requires that the selectee be willing and able to climb ladders and scaffoldingQualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applyingQualification requirements emphasis is on quality of experience, not necessarily the length of timeYour qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed belowThis job has a screen-out element which will be used to determine minimum eligibility for this jobApplicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligibleThe Screen-out Element for this position is:
ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION such as:
Experience reading, interpreting, and following complex written instructions, drawings, blueprints, specifications, radiological engineering standard, proper ventilation requirements for each situation and process instructions, corporate standards, and shop practicesExperience planning, organizing, coordinating, and implementing numerous quality-related requirements as they relate to design, fabrication, inspection, installation, and removal for both off-hull and in-hull enclosuresExperience using a variety of sensitive, calibrated, and precision trade specific instruments and equipment such as:
laser no-touch thermometers, digital laser levels, digital angle locaters, micrometers, automatic wedge, welding sealers, ultrasonic sealers, radio frequency heat sealers, CNC machines, air driven grommet, presses, computerized light weight, medium weight, and heavy weight sewing machines, programmable, embroidery machines, and programmable box stitch machinesExperience using mathematical principles of arithmetic, algebra, and geometry to figure out irregular curves, angles, planes, pitches, cylindrical, tapered, truncated cones and frustums for containment lay outApplicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor OccupationsAdditional qualification information can be found at:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentAdditional information This position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ)To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separationTo be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higherICTAP candidates must provide copies of all of the following documentation at the time of application:
1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty locationApplicants who do not provide this documentation will not receive consideration as an ICTAP candidateFor more information about ICTAP eligibility please review the following link:
https:
//www.
usajobs.
gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/ Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittentContact the hiring agency for more information on the specific benefits offeredHow You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications aboveIn order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities, to perform the duties of the specific position for which you are being consideredYour resume is the key means we have for evaluating your skills, knowledge, and abilities, as they relate to this positionTherefore, we encourage you to be clear and specific when describing your experienceWhen the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcementYou will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following job elements:
o ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION ABILITY TO FOLLOW DIRECTIONS IN A SHOP ABILITY TO INTERPRET INSTRUCTIONS AND SPECIFICATIONS, INCLUDING BLUEPRINT READING KNOWLEDGE OF MATERIALS You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection processIf selected, you may be required to provide supporting documentationIf after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualifiedPlease follow all instructions carefullyErrors or omissions may affect your rating or consideration for employmentAll eligibility and qualification requirements must be met by the closing date of this announcement.
o Benefits Help A career with the U.
Sgovernment provides employees with a comprehensive benefits packageAs a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewardingOpens in a new window Learn more about federal benefits Review our benefit Recommended Skills Algebra Blueprinting Coordinating Geometry Human Resources Industrial Laser Tasking Apply to this job.
Think you're the perfect candidate? Apply on company site Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
