MECHANICAL ENGINEER with Security Clearance
Dutieso You will develop complex designs and analyses utilizing advanced mechanical engineering software.o You will make site investigation field trips to project sites, as required, to collect all pertinent data and refine or develop project scope by inspection of existing conditions and through meetings with sponsoring activity.o You will perform reviews of projects prepared by in-house engineers and architects.o You will perform technical administration of designs, design management, and coordination efforts with other engineers and architects involved in multi-discipline projectsRequirements Conditions of Employmento Must be a US Citizen.o Must be determined suitable for federal employment.o Must participate in the direct deposit pay program.o New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification checkTo learn more about E-Verify, including your rights and responsibilities, visit e-verify.govo Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade levelThis requirement is called time-in-gradeTime-in-grade requirements must be met by the closing date of this announcement.o Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.o Males born after 12-31-59 must be registered for Selective Service.o Per the preliminary nationwide injunction on E.O14043, COVID-19 vaccinations will not be implemented or enforcedFor more information on vaccine status and workplace safety protocol requirements see Additional Information below.o You will be required to obtain and maintain a current valid United States drivers licenseo You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.o This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.o You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.o You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchasesQualifications This position has a selective placement factor that will be used to screen out ineligible candidatesThe selective placement factor is:
current registration as a Professional Engineer (PE) in any state, District of Columbia, Puerto Rico or GuamYou must provide a copy of your current registration with your applicationIn addition to the basic requirements and selective placement factor for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
o Conducting quality review of an installation's mechanical equipment and services (for example:
to determine capabilities, service effectiveness and required operational improvements);o Developing complex construction related mechanical and utility system designs;o Producing proposed designs and results of studies using Utilizing AutoCAD or other mechanical engineering design/analysis software;o Preparing various documents to support in house and Architect-Engineer (A&E) contracts (for example:
outlines of services, scopes of work, construction estimates, calculations and engineering fee estimates and/or other documents); ando Administering large scale utility construction projects to ensure compliance with applicable objective, standards, and requirementsAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsAdditional information This announcement uses the Certain Personnel of the DoD direct hire authority to recruit and appoint qualified candidates to positions in the competitive serviceCertain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selecteesA relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selecteeA relocation incentive may be authorizedThis position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsIf you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information CenterFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirementsOvertime or night differential pay and/or unusual duty hours may be requiredHow You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications aboveIn order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being consideredYour resume is the key means we have for evaluating your skills, knowledge, an Recommended Skills Administration Architecture Auto Cad Calculations Construction Design Management Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
current registration as a Professional Engineer (PE) in any state, District of Columbia, Puerto Rico or GuamYou must provide a copy of your current registration with your applicationIn addition to the basic requirements and selective placement factor for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sectorSpecialized experience must demonstrate the following:
o Conducting quality review of an installation's mechanical equipment and services (for example:
to determine capabilities, service effectiveness and required operational improvements);o Developing complex construction related mechanical and utility system designs;o Producing proposed designs and results of studies using Utilizing AutoCAD or other mechanical engineering design/analysis software;o Preparing various documents to support in house and Architect-Engineer (A&E) contracts (for example:
outlines of services, scopes of work, construction estimates, calculations and engineering fee estimates and/or other documents); ando Administering large scale utility construction projects to ensure compliance with applicable objective, standards, and requirementsAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsAdditional information This announcement uses the Certain Personnel of the DoD direct hire authority to recruit and appoint qualified candidates to positions in the competitive serviceCertain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selecteesA relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selecteeA relocation incentive may be authorizedThis position is covered by the Department of Defense Priority Placement ProgramAdditional vacancies may be filled by this announcementA tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointmentsIf you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information CenterFederal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitantsPolicy information may be found at:
http:
//www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirementsOvertime or night differential pay and/or unusual duty hours may be requiredHow You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications aboveIn order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being consideredYour resume is the key means we have for evaluating your skills, knowledge, an Recommended Skills Administration Architecture Auto Cad Calculations Construction Design Management Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
